JVC GR-DVL105 Answering Machine User Manual


 
EN33
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration ( pg. 32).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCRs instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time
.... set DATE/TIME to ON or OFF in the
Menu Screen ( pg. 30).
Time Code
.... set TIME CODE to ON or OFF in the
Menu Screen (
pg. 30).
Playback Sound Mode, Tape Speed And Tape
Running Displays
.... set ON SCREEN to LCD or SIMPLE in the
Menu Screen ( pg. 30). Or, press DISPLAY
on the remote control (provided).
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (
pg. 7).
When connecting the cables, make sure to
connect the ends with a core filter to the
camcorder. The core filter reduces interference.
To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorders Power Switch to or , then
set your TV to the appropriate input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.