Filter
Top Products
EN23
NOTES:
●
The “MANUAL MENU” settings are effective only when the Power Switch is set to “ ”.
●
“DISPLAY MENU” functions which are set when the Power Switch is set to “ ” are also applied when the
Power Switch is set to “ ” (
੬
pg. 30). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.
●
The “DISPLAY MENU” settings are effective even when the Power Switch is set to “ ”.
●
The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
੬
pg. 33, 36, 44).
: Factory-preset
CAM
RESET
ON
SCREEN
DATE/
TIME
TIME
CODE
CLOCK
ADJ.
WIND
CUT
Helps cut down on noise created by wind. “ ” appears. The quality of the
sound will change. This is normal.
Disengages the function which cuts down on noise created by wind.
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
Keeps the indications (except the tape running indicator, warnings, date, time,
time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s
display (except the date, time and time code) from appearing on the con-
nected TV screen.
The date/time is always displayed.
The date/time does not appear.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Time code is not displayed.
Allows you to set the current date and time (੬ pg. 9).
ON
OFF
CANCEL
EXECUTE
LCD
LCD/TV
SIMPLE
ON
OFF
ON
OFF
MANUAL MENU
DISPLAY MENU