InSciTek Microsystems Allworx Phone Telephone User Manual


 
Phone Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: March 28, 2007
Page 23
4. After making changes to the preferences listed above, press the Select button.
5. Press the EXIT soft key twice.
6. Select the YES soft key to save any changes OR select NO to cancel changes made.
7.4 Reboot the Phone
1. Select the CONFIG soft key.
2. Highlight Reboot Phone.
3. Press the Select button.
4. If you have any unsaved changes, you’ll be asked if you want to save them before rebooting. Select the
YES soft key to save any changes OR select NO to cancel changes made.
5. Select the YES soft key on the next prompt to confirm the phone reboot.
7.5 Clear Call History
The Allworx phone retains the history of your calls up to 99 calls. You can clear your call history by using the
following steps:
1. Select the CONFIG soft key.
2. Scroll down and highlight Clear Call History.
3. Press the Select button.
4. Select the YES soft key to clear call history OR select NO to cancel.
7.6 Refresh Directory
1. Select the CONFIG soft key.
2. Scroll down and highlight Refresh Directory.
3. Press the Select button.
4. Select the Exit soft key to exit the Refreshing the Directory screen.
7.7 Check the Network Settings
Warning: Do not make any changes to your network settings unless instructed by your System
Administrator.
1. Select the CONFIG soft key.
2. Scroll down and highlight Network Settings.
3. Press the Select button.
a.
DHCP – Allows the phone to extract its configuration from the server.