Filter
Top Products
Phone Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: March 28, 2007
Page 8
7. If you desire to have a private conversation with one of the parties, you may split the conference using
the following steps:
a. Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you
wish to put on hold and then press the Hold button. (The display will show the two parties
involved in the conference).
b. You may now talk to the remaining party.
c. The Call Appearance PFK for the person on hold will be flashing. To have the person re-join the
conference, press Conference, then select the flashing Call Appearance PFK. The three-way
conference is then re-established.
4.4 Intercom
1. Press the Intercom button, and then dial the extension of the person you would like to talk to.
2. The call is connected when the LCD screen displays Active Call.
3. Start talking. The person you called will hear you over their speaker.
4. To deny an incoming Intercom request, press the Ignore soft key.
5. Press the Intercom or Speaker button to end the call.
4.5 Release
The Release button is used to hang-up an active call or to abort a new call setup, such as the middle of a
transfer operation.
4.6 Info
The Info button is only available on the Allworx 9112 phone. The button is used to get information regarding
the other buttons on your phone. For example, you can use the Info button to determine the numbers that have
been programmed for each speed-dial button.
To use this feature:
1. Press the Info button.
2. Press any of the other buttons on the phone.
3. A screen will be displayed with a brief description of the selected button.
4. Press the Info button a second time or let the screen time-out to exit the description screen.
4.7 Speaker
Press the Speaker button for hands-free use of the phone.
If you’re already using the handset, you can: