Filter
Top Products
HandyTone-486 User Manual Grandstream Networks, Inc.
23
Cloned WAN MAC
Address:
Allow user to set a specific MAC address. Set in Hex format.
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0. If bridge mode is
selected, the LAN settings have no effect.
LAN DHCP Base IP:
Base IP for the LAN port, which functions as a gateway for its LAN. Default
value is 192.168.2.1
DHCP IP Lease
Time
The amount of time that a given IP address will be valid for a LAN client.
Value is set in units of hours. Default value is 120hr (5 Days).
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port is
used by HandyTone-486 itself or in the defined port forwarding.
Port Forwarding:
Allow user to forward a matching (TCP/UDP) port to a specific LAN IP
address with a specific (TCP/UDP) port.
In addition to the Basic Settings configuration page, end users also have access to the device Status
page. The following is a snap shot of the device Status page. Details will be explained next.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
MAC Address:
00.0B.82.03.31.D2
WAN IP Address:
192.168.1.180
Product Model:
HT486 REV 2.0
Software Version:
Program-- 1.0.8.32 Bootloader-- 1.0.8.11 HTML-- 1.0.8.32 VOC--
1.0.0.12
Configuration Version:
System Up Time:
0 day(s) 5 hour(s) 6 minute(s)
Registered:
Yes
PPPoE Link Up:
disabled
NAT:
detected NAT type is port restricted cone
NAT Mapped IP:
67.153.142.88
NAT Mapped Port:
5060
Total Inbound Calls:
0
Total Outbound Calls:
0
Total Missed Calls:
0
Total Call Time (in
minutes):
0
Total SIP Message Sent:
13
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030