Filter
Top Products
HNT1A Internet Phone User’s Manual
14
3a. Using the HNT1A Phone with Skype
®
Connecting the HNT1A USB Phone
When the USB Phone is connected to a computer, the LCD backlight will turn on
and the device will connect to the installed Net-Talk™ software. When the
connection has been established, the screen will display Hawking Technologies
which means the HNT1A is ready for use.
Note: If Connecting… keeps showing on the display screen, the device might
have a problem communicating with Skype. Please check your internet connection.
If you are connected, but the problem persists, please to the “Troubleshooting”
section of this manual to resolve this problem.
Calling a Skype
®
User
Prerequisites
To call a Skype user, you need to launch Skype
®
and log in. After you have
added Skype
®
user(s) to your contact list, you can start making calls using the
HNT1A Net-Talk
TM
phone. For additional instructions on how to use Skype
®
and
a detailed description of its functions, please go to Skype’s homepage
(http://www.skype.com
).
Loading the Contact List onto the LCD Display
1. Press the Right Directional Menu key (Contact List key) to load the Skype
contact list. Only one contact is displayed at a time. The top-right icon
indicates the online status of the contact. The
symbol means online
while the
symbol means offline. You can only make calls to users who
are online.
2. Use the Up / Down Directional Menu keypad to select the desired contact. (To
exit the contact list, press the Contact List key again or press the hang up (
)
key.