Filter
Top Products
Grandstream Networks, Inc. GXP1400/1405 User Manual Page 9 of 36
Firmware version: 1.0.1.83 Last Updated: 08/2011
DND Icon:
OFF - “Do Not Disturb” disabled ON - “Do Not Disturb” enabled
Calls Forwarded Icon:
INDICATES calls are forwarded. Please refer to call forwarding procedures
MUTE Icon:
INDICATES call is on MUTE during the call
SRTP Icon:
INDICATES SRTP is enabled for the call
Table 9: GXP1400/1405 KEYPAD BUTTONS
Button Descriptions
HOLD
Place active call on hold
TRANSFER
Transfer an active call to another number
CONF
Press CONF button to connect Calling/Called party into conference
LINE 1 / LINE 2
Switch between Line 1 and Line 2
Mute an active call; or use as DND button when the phone is in idle state.
Press HEADSET key to answer/hang up phone calls when using headset. It also
allows user to toggle between headset and speaker
Enable/Disable hands-free speaker
Enable/Disable handset mode; or used as SEND/REDIAL
Press the four navigation keys to move up/down/left/right
Press the round button in the center to enter Keypad Configuration “MENU”
mode when phone is idle. Or use it as ENTER key when in Keypad
Configuration
Adjust volume by pressing “– “or “+”
0 - 9, *, #
Standard phone keypad; press # key to send call; press * key to for IVR
functions
MAKING PHONE CALLS
Handset, Headset and Speakerphone
The GXP1400/1405 allows you to make phone calls via handset, headset or speakerphone. During the
active calls the user can switch between the handset, headset and the speakerphone by pressing the
corresponding keys on the phone.