Filter
Top Products
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 29 of 52
If you want to register ahandset to a new base, it has to be first de-registered from the existing base
by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then repeat
the above steps.
COMPLETING CALLS
There are three ways to complete a call:
A. Dial
1. Press .
3. Dial the number you want once you hear the dial tone.
4. The number appears on the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
5. To finish the call, press or place the handset in the base unit or the charger unit.
B. Redial
1. Press .
2. The number you have most recently called appears in first place in the display.
3. Use or to search for the number you need.
4. Press .
5. The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press or replace the handset in the base unit or the charger unit.
C.Using the Phonebook
1. Press .
2. The first number in the phonebook appears on the display.
3. Press or to browse the phonebook.
4. Press .
5. The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press or replace the handset in the base unit or the handset charger unit.
ANSWERING CALLS
The handset starts ringing during an incoming call; you have the following options to answer:
a. Press to pick up the call.