Filter
Top Products
BudgeTone-100 User Manual Grandstream Networks, Inc.
- 36 -
Default Ring
Tone
• By default “System Ring Tone” is selected. All calls received that do not
match any “incoming caller ID” number will generate the selected ring tone
- system, 1, 2 or 3.
• The user can setup up one number on each of the ring tones 1, 2, and 3.
When a call is received from one of these numbers, the respective ring tone
will be generated.
• If the ring tone does not exist, the system default ring tone will be played.
For BT-100, ring 3 is not supported.
Send Anonymous
If this parameter is set to “Yes”, user ID will be sent as anonymous, essentially
block the Caller ID from displaying.
Anonymous
Method
This is decided by supported SIP server/proxy. Either “Use From Header” or
“Use Privacy Header” depends on how SIP sever/proxy process the SIP header.
Special Feature
Default is Standard. Choose the selection to meet some special requirements
from Soft Switch vendors like Nortel, Sonus, Broadsoft, etc. End user please do
not touch this parameter.
Syslog Server
The IP address or URL of System log server, especially useful for ITSP (Internet
Telephone Service Provider). End user don’t encourage to touch this part