Filter
Top Products
BudgeTone-100 User Manual Grandstream Networks, Inc.
- 32 -
Admin Password
Administrator password. Only administrator can configure the “Advanced
Settings” page. Password field is purposely blanked for security reason after
clicking update and saved. The maximum password length is 25 characters.
SIP Server
IP address or FQDN domain name provided by VoIP service provider.
e.g., the following are some valid examples:
sip.my-voip-provider.com or sip:my-company-sip-server.com or
192.168.1.200:5066 (where 5066 is the port number different to default 5060)
Outbound Proxy
IP address or FQDN domain name of Outbound Proxy, or Media Gateway, or
Session Border Controller. Used by IP phone for firewall or NAT penetration in
different network environment. If symmetric NAT is detected, STUN will not
work and ONLY outbound proxy will provide solution for it.
SIP User ID
User account information, provided by VoIP service provider (ITSP), usually has
the form of digits similar to phone number or actually a phone number
Authentication
ID
ID used for authentication, usually same as SIP user ID, but could be different
and decided by the ITSP
Authenticate
Password
Account information, password for IP Phone to register to (SIP) servers of ITSP.
Maximum length is 25 characters.
Preferred
Vocoder
The BudgeTone IP phone supports up to 8 different codec types including
G711-ulaw (PCMU), G711-alaw (PCMA), G723, G729A, G726-32 (ADPCM),
G722, G728 and iLBC.
A user can configure codecs in a preference list that will be included with the
same preference order in SDP message. The first codec in this list can be entered
by choosing the appropriate option in “Choice 1”. Similarly, the last codec in
this list can be entered by choosing the appropriate option in “Choice 8”.
G723 Rate:
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
iLBC frame size
iLBC packet frame size. Default is 20ms.
For Asterisk IP-PBX, 30ms might need to be configured for compatibility
iLBC payload
type
Payload type for iLBC. Default value is 97.
The valid range is between 96 and 127.
Silence
Suppression
This controls the silence suppression/VAD feature of G723 and G729. If set to
“Yes”, when a silence is detected, small quantity of VAD packets (instead of
audio packets) will be sent during the period of no talking. If set to “No”, this
feature is disabled.