Filter
Top Products
Operation / Fonctionnement / Funcionamiento / Bediening / Betrieb
312540E 21
Troubleshooting
PROBLEM CAUSE SOLUTION
Engine does not start Parking brake not engaged. Engine
switch OFF, no gasoline or low oil
Set Brake. Consult engine manual,
supplied
Engine races to high rpm - stalls dur-
ing operation
Worn governor Consult engine manual, supplied
Engine operates, LineDriver does not
move forward or reverse
Low hydraulic oil
Wheel release is open.
Fill with Mobil 1 (15W-50) synthetic oil
Close; hand tight.
Engine operates, LineDriver moves
slowly in forward and reverse
Low hydraulic oil. Parking brake is
set.
Wheel release is open.
Fill with Mobil 1 (15W-50) synthetic
oil. Release parking brake.
Close; hand tight.
Engine shuts off when operator exits
LineDriver
Safety switch Set parking brake
Engine continues to run when opera-
tor exits LineDriver and parking brake
is not set
Safety switch Adjust and set parking brake.
Replace safety switch and/or any
connecting wires.
Engine misses during turns and for-
ward and reverse changes
Engine oil low
1. Consult engine manual for proper oil
2. Keep engine oil full to avoid nuisance
stalls caused by Oil Alert sensing low oil
levels.
Parking brake does not keep Line-
Driver from moving
Parking brake needs adjustment Adjust parking brake
LineDriver creeps in forward or
reverse direction
Parking brake needs adjustment Adjust parking brake
Engine light does not turn on Check light bulb Replace light bulb
Check connections Repair connections
Check Switch position on regulator Set Switch position on regulator:
1. Set to No Battery if your LineDriver has
no battery
2. Set to Battery if your LineDriver has a bat-
tery
Engine runs for short time and stops Fuel flow restriction See engine manual