Filter
Top Products
Using Your Phone
[37] Using Your Phone
www.uniden.com
Placing a Call on Hold
During a call, press back/hold/int'com and then end, to put the
call on hold. Press talk/flash to go back to the call.
Conferencing
If you have more than one handset, two handsets can talk to
the outside caller at the same time in a conference call. Once a
call is in progress, press talk/flash to join the call. To hang up,
press end. The other handset will still be connected after you
hang up. If the other handset is in privacy mode, you won't be able to join the call.
Redialing Calls
You can quickly redial the last 20 phone numbers for each
handset.
With the phone in standby mode, press redial/ on the
handset. This brings up the redial list. Use the up/down
key to scroll through the numbers, and select the number
you want to dial. Press talk/flash (or ) or the CALL soft
key to dial the selected number.
You can also display the redial list with the phone in talk
mode. After selecting the redial number, press the DIAL
soft key to redial the number.
570#
*QNF
4GFKCN
126+105126+105
%#..%#..
•If you leave a call on
hold for more than 5
minutes, warning tone
sounds and
Hold
reminder! Answer
held line
appears,
and the line will
disconnect in 15
seconds.
•If someone is using
another handset in
Privacy Mode,
Unavailable
appears
in the display and you
cannot join the call.
note
UP742.book Page 37 Thursday, February 3, 2005 9:39 PM