Filter
Top Products
Expanding Your Phone
Expanding Your Phone [12]
www.uniden.com
Connect the expansion handset's charger
The handset is powered by a
rechargeable battery pack. The battery
recharges automatically when the
handset is placed in the charger.
1) Connect the AC adapter to the DC IN 9V
jack and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop,
and place the handset in the charger
with the sub-LCD screen facing forward.
3) Make sure that the charge LED
illuminates.
If the LED does not illuminate, check to
see that the AC adapter is plugged in
and the handset makes good contact
with the charger charging contacts.
4) Charge the handset battery pack for at
least 10 hours before using your new
expansion handset for the first time.
Register the Handset
Any handsets supplied with the phone are registered to the base by the factory.
Pre-registered handsets display a handset ID number. Handsets that have not been
registered display
MUST place the handset in base to register! Models may vary,
refer to Owners Manual for help.
in the LCD, and
Handset must be registered
in
the sub LCD. When you register an extra handset to the base, the handset ID will be
assigned. Only one handset can be registered at a time.
•Use only the supplied
AD-0005 AC adapter.
Do not use any other
AC adapter.
•Your phone maybe
compatible with other
Uniden 5.8Ghz Digital
Expandable Systems.
Look for the technology
icon on our boxes or
visit our website for a
list of compatible
models.
note
UP742.book Page 12 Thursday, February 3, 2005 9:39 PM