Filter
Top Products
System Setup Menu
[29] System Setup Menu
www.uniden.com
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or cd player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
2) Go to
Rec/Edit Rings
.
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Select
Record
. To start recording, press the RECORD soft key.
The LCD displays
20
and then begins to count down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To re-record the ringer, press
the ReRec soft key while playing the ringer.
6) Enter the title of this ringer (up to 12 digits) using the number
keypad, the DELETE soft key, right, or left key.
7) Press menu/select, you will hear a confirmation tone, and
Done!
appears.
Playing the Ringer
1) Go to
Rec/Edit Rings
.
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the up/down key to select
Play
. To stop, press menu/select
or the STOP soft key.
4GEQTF4KPIGT
9CKVKPIVQ
4GEQTF
4'%14&
1RVKQPU
2NC[
%JCPIG6KVNG
&GNGVG
5'.'%6
UP742.book Page 29 Thursday, February 3, 2005 9:39 PM