Filter
Top Products
Expanding Your Phone
[13] Expanding Your Phone
www.uniden.com
Register the ELX500 expansion handset to the main base
Before the expansion handset is registered, the battery pack MUST be charged for 10
hours.
To register an ELX500 handset, simply place it in the main base.
While the handset is registering,
Handset Registering
will appear in the LCD. When
Registration complete.
is displayed, the handset has been registered to the base. If
Registration failed.
appears, please try these steps again.
To register a TCX860 handset, follow the steps below:
1) Remove the battery compartment cover from the back of
the main base.
2) Press and hold the
Registration button in the battery
compartment.
3) Keep pressing the
Registration button until the
handset charge LED on main base start to blink.
4) On the handset, press and hold # until you hear a beep.
While the handset is registering,
Handset Registering
will appear in the LCD. When
Registration complete.
is displayed, the handset has been registered to the base. If
Registration failed.
appears, please try these steps again.
Registration
button
UP742.book Page 13 Thursday, February 3, 2005 9:39 PM