Filter
Top Products
To record a new outgoing message (OGM)
1 Dial your number.
2 During the OGM, press
✳✳
✳✳
✳.
You’ll hear 3 beeps.
3 Enter your security code.
You’ll hear 2 beeps.
4 Within 4 seconds, press 4 7 (for OGM1) or 4 9 (for
OGM2).
5 Speak after the 4 beeps, then press 7.
6 To hear the new OGM press 4 1 (OGM1) or 4 3
(OGM2).
To switch the machine on or off
1 Dial your number.
if the machine’s off it’ll answer after 15 rings.
2 During the OGM press
✳✳
✳✳
✳.
You’ll hear 3 beeps.
3 Enter your security code.
You’ll hear 2 beeps.
4 Within 4 seconds, press 0 to switch on or 8 8 to
switch off.
RC/RP7510 Issue 1 06/97
REMOTE ACCESS CARD
Write down your security code.
To listen to messages
1 Dial your number.
2 During the OGM, press
✳✳
✳✳
✳.
You’ll hear 3 beeps.
3 Enter your security code. Your messages will be
played back.
•To pause, press 7. To continue, press 7.
• To skip to previous message press 2.
• To skip to next message press 5.
•To erase all messages: after you hear ‘end
of messages’ press 33.
• To repeat playback at end press 7.
• To stop, press 7 and hang up.
• If the machine stops, press 7 to continue.
REMOTE ACCESS CARD
Remote access
If you require the use of remote operation, please make a note of your remote access
number, which can be found on the underside of your unit and keep one of these cards
safely in your purse/wallet at all times.
13