Filter
Top Products
20
Dialling mode (Tone/Pulse) settings
In the UK, all telephone exchanges now use Tone dialling.
If your phone does not dial out, it is probably being used
from an older private switchboard (PBX). In this case, the
Tone/Pulse setting must be changed to Pulse.
To set the Tone/Pulse, press the "Menu" button to enter
the menu. The display will show and announce the word
"Store". Press either the "
" or " " button until you reach
"Setting" and press the "Ok" button. Press either the "
"
or "
" button until you reach "Tone/Pulse" and press the
"Ok" button. Press either the "
" or " " button to toggle
between Tone and Pulse. Select Tone and press "Ok"
button to confirm. Press the "PB" button to exit and the
telephone will beep.
Ringer volume setting
Set the ringer volume by adjusting the slide-switch on the
right edge of the telephone. The high volume is the top
setting, medium is the middle setting and low is the bottom
setting.
Settings OPERATION