Geemarc AMPLI600 Telephone User Manual


 
12
SETTINGS
Dialling Mode
The Tone/Pulse is factory pre-set to Tone (Tone). In the US, all telephone
exchanges now use Tone dialling. If your phone does not dial out, it is
probably being used from an older private switch-board (PBX). In this case,
theTone/Pulse setting must be moved to Pulse (Pulse).
Press MUTE
Use
or to select ‘SET PHONE
Press OK
Use
or to select ‘TONE /PULSE’
Press OK
Select ‘TONE’or‘PULSE
Press OK to conrm
Press C three times to exit