Filter
Top Products
The GE 2-9450 telephone has been factory
assembled for use on a desk or table.
A. Remove the clear ACRYL/C COVER that covers
/
the MEMORY /NDEX. Carefully remove the
MEMORY INDEX CARD and the QUICK
REFERENCE GUIDE.
B.NOTE: THIS STEP IS ESSENTIAL.
1
You must install a 9V Alkaline Battery. It provides
back-up power to preserve numbers in memory
and any other stored information in the event of
any interruption of AC power to the telephone.
More importantly it allows use of the phone
during power outages.
Unscrew the BATTERY COVER. Pull the battery re-
moval ribbon so that it extends out of the top of the bat-
tery compartment. Insert a 9V Alkaline Battery
(Not Provided) and replace the BATTERY COVER.
C. In pencil, write in all the users’ names you’ve list-
ed on the worksheet under the appropriate station
numbers on the MEMORY /NDEX CARD. Replace
the QUICK REFERENCE GUIDE, MEMORY lN-
DEX CARD and the ACRYLIC COVER.
D. Connect one end of a LONG TELEPHONE L/NE
CORD to the jack on the back of the telephone
Iabelied L/NE 1-2. Connect the other end to the
jack(s) Iabelled
1 & 2 either:
,
3.
Install Desk or
Table Top Telephones
/MPORTANZ Telephone line cords must be con-
nected (Steps D through F) before AC power con-
nection is made (Step G). Please follow these steps
in their proper sequence.
1. directly to the wall jack if it is a two-line RJ14
jack.
OR
9-41
2. to a two line adapter (not provided) if you have
two single line RJ1l jacks for lines 1 & 2. Con-
,
nect the adapter to the wall jacks with short
telephone line cords (Not Provided).
&&~7