Filter
Top Products
6
Telephone Jack Requirements
To properly connect your phone to your telephone lines, you should
identify the type of wall jack(s) you have. You will need an RJ11C (for
a single line) or an RJ14C (for two lines) type modular phone jack,
which might look like the one pictured here, installed in your home.
If you don’t have either modular jack, call your local phone company to nd out how
to get one installed.
Important Installation Information
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as faxes,
other phones, or modems.
Introduction
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product
and save them for future reference.
Before You Begin
Parts Checklist
Make sure your package includes the following items:
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
*
OPER
0 #
STORE
VOLUME
FLASH
HEADSET MUTE HOLD
CONF
LINE 2
LINE 1
SPEAKER
LOWER
M8
M7
M6
M5
M4
M3
M2
M1
SET
REDIAL
BaseHandsetDesktop/wall
mounting pedestal
Handset
cord
One 4-wire
line cord
AC power
adaptor
Modular
telephone
line jack
Wall plate