Filter
Top Products
19
Storing a Chain of Numbers
You can link together a dialing sequence of phone numbers in separate memory
locations by combining them in a single memory location or have another memory
location stored in one of the locations to be linked.
For example Memory Location
Local access number of long distance company. 6
Authorization code (ID). 7
Where entire sequence is to be stored 8
including long distance phone number.
Storing
1. Press STORE.
2. Press memory location 6.
3. Press REDIAL/pause.
4. Press memory location 7.
5. Press REDIAL/pause.
6. Enter long distance number.
7. Press STORE.
8. Press location 8, where the entire location is to be stored.
9. Write the name for this location on the memory index card.
NOTE: When a chain number is stored in a memory location, it
cannot be stored as another chain number sequence in a separate
memory location.
Storing a Pause
The REDIAL/pause button has dual functionality and becomes a PAUSE when the STORE
button is pressed rst. It is valid only when storing a number into memory locations.
Use the REDIAL/pause button to insert a pause when a delay is needed in the dialing
sequence (for example, when you must dial a 9 to get an outside line or when
you must enter codes to access your bank’s information line). The pause time is 4
seconds, if you need an additional 4 seconds, press the REDIAL/pause button again
when storing the pause into a memory location. P shows in the display.