GE 29484GE2 Telephone User Manual


 
23
Speaker volume: MID 2
Handset volume: LOW
Headset volume: LOW
Ringer tone: Line 1 = 1, Line 2 = 2
Incoming call tone: ON
To reset to the default settings:
1. Press the LOWER button.
2. Simultaneously press and hold * and #. After about 2 seconds you will hear a beep
for two seconds.
3. Release the * # keys. All user programmable settings will return to the default
settings.
NOTE: Time and numbers stored in memory are not effected.
Data Port
This phone is equipped with a DATA PORT jack for you to connect an auxiliary phone
device, such as a fax machine, computer modem,
answering machine, or even a cordless phone. The DATA PORT is connected in parallel
to Line 2.
Connecting an Optional Headset
CAUTION: Use only the 5-2425 headset with this unit. Using
other headsets may damage the unit.
An optional headset can be used as an alternative to using the handset, and is
especially useful for long calls. Contact the Thomson Mail Order Department at 1-
800-338-0376 to order the headset 5-2425.
Connect the headset cord to the headset jack on the side of the base unit.
When the headset is not in use, simply press the HEADSET button to turn off headset
mode and return to normal handset or speakerphone mode.