Filter
Top Products
58
Caller information is interrupted during transmission or the
phone line is excessively noisy.
Displays on handset while the line is in use.
Indicates CID record is from a long distance call.
Indicates the battery needs to be charged.
Indicates call or calls have not been reviewed.
XX represents the number of new CID records not reviewed.
Indicates there are no CID records in memory.
No Caller ID information was received.
May indicate handset is too far away from the base or that
the power has been interrupted. Move closer and check
connections.
Someone pressed the PAGE button on the base or INT
button on the handset
Indicates the handset needs to be registered before use.
Repeat call message. Indicates that a new call from the same
number was received more than once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
The incoming call is from an area not serviced by Caller ID or
the information was not sent.
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One long beep Conrmation tone for the
completion of a function
One short beep (during room monitoring mode) Ring alert tone
One short beep (every 7 seconds) Low battery warning