Filter
Top Products
30
3. Press and hold the MUTE button on the base while plugging in the DC connector
until the base displays Initialization and then Deregister All Handsets.
4. Press the Yes (SKL) button to deregister all handsets.
5. De-Registration Successful shows in both the handset and base displays,
followed by HANDSET NEEDS REGISTRATION and PLEASE PUT HANDSET IN BASE.
6. Place handsets in base to automatically re-register to base OR re-register through
the handset using Phone Setting>Registration menus.
7. Press the Store (SKL) button to save the settings. You will hear a conrmation tone.
8. Re-install the backup batteries in the base and then plug the telephone line cord
back into the TEL LINE jack on the back of the base.
Phone Setting
1. Use the
or button to scroll to Default Setting.
. Press the Select (SKL) button to enter the menu.
3. Use the
or button to scroll to No or Yes. The default is No.
4. If you select
Yes, all the settings in the programmable menu are returned to
factory default setting. Press the Select (SKL) button to save your selection.
You will hear a conrmation tone.
There are four programmable menus available: Equalizer, Ring Tone, Ringer Volume
and Key Tone.
1. Make sure your handset is
(not in talk mode).
. Press the Menu (SKL) button and use the
or button to scroll to Sound
Setting.
3. Press the Select (SKL) button to enter the menu.
This feature lets you to adjust the audio quality.
Sound Setting
1. Use the
or button to scroll to Equalizer.