Filter
Top Products
16
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
SET TIME
NOTE: This setting may only be made with the base.
NOTE: Time of day is automatically transmitted by your local phone company
as part of Caller ID service. If you subscribe to Caller ID service, the current
time is set automatically when you receive your first CID record. Otherwise,
you may set the time manually.
NOTE: If you want to keep the current time, press the flash/program button
when the display shows - - : - - AM PM.
1. Press the flash/program button until
SET TIME 12:00 >AM PM
shows on
the display. The default setting is
12:00 AM.
2. Use the touch-tone pad to enter the current time. In the display, the
arrow automatically moves to the
AM
field. Use the cid/messages (< or
>) button to move the arrow to
PM
, if necessary.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
AREA CODE
NOTE: This setting may be made with the base and the handset.
If you enter a 3-digit area code here, your local area code does not appear
in Caller ID messages you review. Instead, you will see only the local
seven digit number. Calls you receive from outside your local area code
display as the full ten-digit number.
1. Press the flash/program button until
SET AREA CODE - - -
shows on the
base unit display or
AREA CODE - - -
shows on the handset display. The
default setting is - - -.
SET TIME
12:00
>
AM PM