Filter
Top Products
14
1. Press the flash/program button until
SET RING LEVEL >1HI 2LO 3OFF
shows in the display. The default setting is
1HI
.
2. Use the touch-tone pad to select
1, 2,
or
3
or use the cid/messages (< or
>) buttons to scroll to
1HI
,
2LO
, or
3OFF
.
3. Press flash/program again to store your selection. You will hear a
confirmation tone (at the base only).
NOTE: If you turn the ringer OFF, “RINGER OFF” shows in the base display.
RINGER TONE
NOTE: This setting may be made with the base and the handset.
You may choose from three different ringer tones.
1. Press the flash/program button until
SET RINGER TONE > 1 2 3
shows
on the base unit display or
RINGER TONE > 1
shows on the handset
display. The default ringer tone is
1.
Prompt displayed on the base unit Prompt displayed on the handset
2. Use the touch-tone pad to select
1, 2, 3
or use the cid/messages (< or >)
buttons on the base unit or CID/VOL ( < or > ) buttons on the handset to
scroll to your selection. The ringer tone plays for few seconds.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
TONE/PULSE
NOTE: This setting may only be made with the base.
SET
RING
LEVEL
>
1HI 2LO 3OFF
SET
RINGER
TONE
> 1
2
3
RINGER
TONE
>
1