Filter
Top Products
12
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
DISPLAY CONTRAST
NOTE: This setting may only be made with the base.
1. Press the flash/program button until
SET CONTRAST >1 2 3
shows in
the display. “
1
” is the default setting.
2. Press
1
,
2
or
3
on the base touch-tone to enter your selection or use the
cid/messages ( < or > ) button on the base to scroll to your selection.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
RING TO ANSWER
NOTE: This setting may only be made with the base.
You may set the number of times you want the phone to ring before the
answering system answers a call.
1. Press the flash/program button until
RING TO ANSWER > 3, 5 TOLL
shows in the display. “
5
” is the default setting.
2. Press 3 or 5 or use the cid/messages (< or >) to scroll to
3, 5
or
TOLL
.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
USING TOLL SAVER
Toll Saver can save you the cost of a toll call when accessing your
messages from another phone:
SET CONTRAST
>1 2 3
RING TO ANSWER
3
>
5 TOLL