Filter
Top Products
30
Answering System Display Messages
The following messages show the status of the answering system or help
you set up and use the system.
0-59 Indicates the total number of messages.
CL (blinking) The voice time/day stamp needs to be set.
- - Answering system is turned off.
An (blinking) The system is answering a call.
F (blinking) Answering system memory is full.
Six bars (blinking) The system is recording a memo or
an announcement.
LA (Line Access) External line remote answering system.
Troubleshooting Tips
Cordless Phone Solutions
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
• Connect another phone to the same wall jack; if it doesn’t work, the
problem might be your wiring or local service.
• The handset may be out of range of the base. Move closer to the base.
• Make sure the battery is properly charged (16 hours).
• Make sure the battery pack (in the handset) is properly installed.
• The handset should beep when you press the talk/callback button, and
the charge/in use indicator on the base should be lit when the handset
rests in the cradle. If not, the battery may need to be charged.
• Place the handset in the base for at least 20 seconds to reset the unit.