Filter
Top Products
28
Handset Sound Signals
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps (several times) Page signal
Single beep every 7 seconds Low battery warning
Two short beeps Error tone
Display Messages
The following messages shows the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
ERROR Caller information is interrupted during
transmission, or the phone is excessively noisy.
ENTER TEL NUMBR Prompt telling you to enter a telephone number in
one of the 10 memory locations.
ENTER NAME Prompt telling you to enter the name for one of
the 10 memory locations.
DELETE ALL? Prompt asking if you want to erase all
Caller ID records.
DELETE CALL ID? Prompt asking if you want to erase a Caller ID record.
DELETED Prompt confirming the Caller ID record is erased.
END OF LIST Indicates that there is no additional information in
Caller ID memory.
NEW Indicates call or calls have not been reviewed.
UNKNOWN NAME/ The incoming call is from an area not serviced by
CALLER/NUMBER Caller ID or the CID information was not sent.
PAGING Indicates the page button on the base is pressed.
BLOCKED CALL The caller’s number is blocked from transmission.