Filter
Top Products
40
Deleting All CID Records
1. Make sure the phone is OFF (not in talk mode).
2. Use the CALLER ID-VOL
( or ) button to scroll to any CID record.
3. Press and hold the DELETE button until DELETE ALL? shows in the display.
4. Press DELETE button to erase all of the current CID records. The display shows
DELETED followed by NO CALLS.
NOTE: Press the *EXIT key on the handset to return to the standby mode.
Remote Access
You may access the answering system with the cordless handset or from any tone-dial
compatible telephone.
Cordless Handset
Use the corresponding handset keys just like you would use the base buttons (see
“Answering System Setup”). The button functions are located on the handset above each
number key. For example, to play messages:
• Press the FLASH/answerer button. The display shows ANSWERER REMOTE ACCESS
.
• Press 2 (PLAY/STOP) followed by the mailbox number to play the message in that
mailbox. For example, press 2 and 3 to play the message in mailbox 3.
• When you are finished listening to your messages, press the FLASH/answerer button
again.
Screening Calls from the Handset
Use the handset to screen calls even when you can’t hear the answering system.
When the answering system picks up:
1. Press the FLASH/answerer button to access the answering system.
2. Listen as the caller leaves a message.
3. Press the TALK•CALL BACK or SPEAKER buttons to speak to the person or press the
FLASH/answerer button to stop screening the call.
NOTE: Programming for Remote Access feature, can ONLY be done with the
25833A handset, this function cannot be programmed using the optional 25832A
handsets.