Filter
Top Products
21
4. Press MUTE/PROG button to confirm.
5. Press the CALLER ID-VOL (
or ) button to scroll to the HANDSET NAME menu.
6. Press MUTE/PROG button to enter the menu.
HANDSET NAME shows in the display.
7. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the 2 key
twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for
the letter L. Wait for 1 second, press the 5 key 3 times for the second letter L, and press
the 1 key to insert a space between the first and last name. Press the 7 key 4 times for
the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I.
Press the 8 key for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake, use the DELETE button to backspace and delete
one character at a time.
8. Press the MUTE/PROG button to save your name. You will hear a confirmation tone
and the handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
1. Make sure your phone is
OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (
or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Make sure the ringer is turned on. See Ringer Volume section.
6. Press the CALLER ID-VOL (or) button to scroll to the RINGER TONE menu.
7. Press MUTE/PROG button to enter the menu. SET RINGER TONE 01
shows in the
display. “01” is default setting.
8. Use the CALLER ID-VOL (
or) button to scroll to the desired setting. You will hear a
sample of the ringer tone you select.
9. Press the MUTE/PROG button to save your selection. You will hear a confirmation tone
and the selected ringer tone shows in the display.
NOTE: Numbers 1 through 10 are for ringer tone and 11 through 20 are for melodies.
Ringer Volume
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (
or) button to scroll to HANDSET SETUP.