Filter
Top Products
51
TIPS: If you access the answering system with any other touch-tone phone, a
voice menu guides you through the steps.
ACCESSING THE ANSWERING SYSTEM WITH THE CORDLESS HANDSET
1. Make sure your handset is in standby mode.
2. Press the flash/answer button to access the answering system. The
display shows “
ANSWERER REMOTE ACCESS
”.
3. Follow the voice menu to use the answering system’s remote functions.
4. Press vol + or vol – button during message playback to adjust the
volume of earpiece or speaker.
5. At any time, you can press the exit button or the flash/answer button to
abort the current operations and return to the standby mode.
ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION
You can access your answering system from any touch-tone
phone by entering your 4-digit security code after you hear the
outgoing announcement.
1. Dial the phone number to which the answering system is connected.
2. When the answering system answers enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
MEMORY FULL
When you access your answering system remotely, and the answering
system’s memory is full, the system answers after 10 rings, beeps, and
awaits for you to enter the 4-digit security code. You have 10 seconds to
enter the security code before the phone disconnects. You should erase
some of the old messages so the system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access the
answering machine, enter your 4-digit security code after you hear the beep.