Filter
Top Products
44
NOTE: Press exit button to return to standby mode.
CID ERRORS
If there is an error in the transmission of information to your phone,
ERROR
or
INCOMPLETE DATA
shows in the display. If you are not
subscribed to CID service, or it is not working properly,
NO DATA
shows in
the display.
ANSWERING SYSTEM SET UP
This section shows you how to set up your answering machine to receive
incoming calls. Answering system setup may only be done at the base.
TURNING THE ANSWERING SYSTEM OFF AND ON
1. Make sure the unit is not in TALK mode.
2. Press the ans on/off button, you will hear “
ANSWER ON
” or
“
ANSWER OFF
”.
3. The MESSAGES indicator lights when the answering system is on. The
indicator and the corresponding mailbox blink when you have new
messages in that mailbox.
NOTE: The answering system displays “- -” when it is off.
VOICE INSTRUCTIONS
If you need additional assistance, press the review (rew) button while in
standby mode and follow the voice instructions.
RECORDING THE OUTGOING ANNOUNCEMENT
Before using your answering system, you should record an outgoing
announcement (the announcement caller hear when your answering
system answers a call). A customized outgoing announcement can be
NO CALLS
CALLER LIST