Filter
Top Products
46
Advanced Operations
3
5
functions on two separate phone lines.
rd
2. This feature only works for 2 lines, if a 3 phone call comes for the
same handset, the call will not be routed to the handset.
Call Waiting (For DuraFon PRO only)
1. A handset, while talking on one phone line, can be informed of the
arrival of a new incoming phone call.
2. For example, suppose that Handset 15 is talking on Line 1. When a
new call comes in on Line 4 and the caller enters extension number
*15* when prompted by the AA, or if the call is set to be routed to
Handset 15 when AA is disabled.
. The base station recognizes that Handset
15 is busy. Instead of announcing to Line 4 that Handset 15 is busy, the
base sends an alert to Handset 15.
. Upon receiving the alert, the handset sounds an audible double beep
4
alert and LCD displays “New call on Line 4”.
. Handset 15 can:
a. Ignore the new call; continue talking to Line 1.
b. Press key to switch to Line 4.
c. Subsequent pressing of key will toggle between Line 1 and
Line 4.
d. Press key while talking to a line will terminate that particular
call and automatically switch back to talking to the remaining line.
Notes:
1. This built-in call waiting is separate from the Call Waiting feature
available from the local phone company. The phone company
provided Call Waiting functions on the same phone line, while the
DuraFon Call Waiting
Switch
FLASH
END
4. Press number , handset enters Base Select setting mode.
5. Use or arrow to scroll up and down the selection (On/Off)
6. Make a selection (default =off), and press (Left softkey).
Re: When turns on the Base Select, you must enter 2-digit Base
ID after press the key.
3
SAVE
TALK
Notes:
1. Because this setting allows handset manually select the base
station, the handset must be in range with the desired base station.