Filter
Top Products
QUICK REFERENCE GUIDE
9
QUICK REFERENCE GUIDE
Power On/Off - Press on-off/volume control.
Set Volume Level - Rotate on-off/volume control.
Change System or Group - Press Select switch to enable system or group
select mode (indicated by ←/→ or __). Then rotate Select switch to
select desired system or group (see page 17).
Select Menu Mode - Press FCN twice then rotate/press Select switch as
required to display/select desired parameter (see page 30).
Select Home System/Group - Press FCN then the Select switch.
Scan On/Off - Press SCAN switch. Scan on = , Scanning occurring =
scrolling underline (see page 33).
Program System or Group Scan List - Press Select switch to enable
system or group programming mode (same as when changing system
or group), then press A/D switch. System in list = , Group in list =
(see page 35).
Set Squelch Level (Conv. Only) - Press FCN, then rotate Select switch
with conventional system selected (see page 18).
Monitor Before Transmitting (Conv. Only) - Take microphone off-hook
to enable monitor mode (indicated by ). Channel is busy if indicator
is green or someone is talking (see page 39).
On-Off/Volume
System Scan
List
Phone
Group Scan
List
Priority
Group
Option
Encryption
Horn
Alert
Scan
Call
Monitor
Selected
Red - Transmit
Green - Busy Conv. Group (Channel)
Amber - Transmit (Reduced Pwr)
Select Switch
(Press/Rotate) (Press/Rotate)
ID