Filter
Top Products
GENERAL FEATURES
26
Squelch Adjust - Pressing FCN and then rotating the Select switch with a
conventional system selected sets the squelch level as described on
page 18.
Home System/Group Select
To select the preprogrammed Home system/group, simply press the
FCN switch and then the Select switch. The Home system/group is then
displayed and it becomes the selected system/group. If no home group
has been programmed, the last selected group of the home system is
selected. If you do not have a FCN switch, or if no Home system is
programmed, this feature is not available.
Horn Alert
If this feature has been installed by your system operator, it activates
an external alert such as the vehicle horn or lights when a call is received
on a group programmed for horn alert. When the horn alert is enabled,
is displayed as shown in the following illustration.
When enabled, the horn alert pulses on and off for 1-8 cycles and
then goes back to the disabled state. To change the currently selected horn
alert mode, the HORN option switch or HRN ALRT menu parameter can
be used if available (see page 30).
The horn alert is programmed to operate in the manual or automatic
mode (see descriptions which follow). If the ignition switch does not
control transceiver power, only the front panel power switch affects oper-
ation when applicable. Refer to “Power Turn-Off Delay” on page 27 for
more information.
Horn Alert
Enabled