Filter
Top Products
MISCELLANEOUS
50
Display Messages
The following messages appear on the upper or lower line of the
display to indicate various operating modes and error conditions. The
group alpha tag appears in this area during normal operation.
BLK CALL - Indicates that the call is being received on an LTR block
ID code (see “Calls on Priority and Block ID Codes” on page 40).
BUSY - Indicates that the LTR radio system is currently busy (see “Busy
Tone” on page 47).
CG ON or OFF - Indicates that Call Guard squelch was just enabled or
disabled by the CG option switch (see “Monitor Mode” on page 44).
DSBL BSY - Indicates that the transmitter is disabled by the conven-
tional Transmit Disable On Busy feature (see page 44). It also indicates
that the transmitter was keyed while receiving an LTR call.
EMERGNCY - Indicates that the emergency switch has been pressed
(see “Emergency Switch” on page 24).
FCN - Indicates that the function select mode is selected by the FCN
option switch (see page 25).
GSCN DIS - Indicates that an attempt was made to delete a group from
the scan list with group scanning disabled (see “Scan List Programming”
on page 35).
IN QUEUE - Indicates that the call has been placed in queue by the LTR
Busy Queuing feature (see “Busy Queuing” on page 42).
Model - The last seven digits of the transceiver part number are indicated
very briefly on the top line of the display when transceiver power is
turned on. This number indicates such things as frequency band, power
output, and tier of the transceiver. The eighth digit is reserved and always
“0”.