Filter
Top Products
A part’s listing in this catalog does not guarantee its availability.
To download/print the most current catalog, go to www.lordfulfi llment.com/upload/PC7000.pdf. Rev.1 10/08
Page 102 of 124
DYNAFLEX ELASTOMERIC FLEXIBLE COUPLINGS
Figure 3 – Joint Dimensions - J-6250-2
Table 3 – Typical Socket Dimensions
Figure 4 – Joint Dimensions - J-5915-58
Figure 5 – Socket Dimensions
Part
Number
A
Socket
Dia.
B
C
Radius
Chamfer x 45°
in mm in mm in mm in mm
J-6250-2 1.00 25.4 0.69 17.5 0.19 4.8 0.13 3.3
J-5915-58 2.19 55.6 1.06 26.9 0.25 6.4 0.19 4.8
Installation Instructions: Use P-80 lube or equivalent mixed to manufacturer’s specifi cations. Immerse rubber
bushing in P-80 solution, making sure entire bushing is wet. Insert bushing into socket by pressing with adequate
force to seat the bushing properly between the retaining lips. Appearance of top and bottom should be uniform after
assembly.
LORD does not supply hubs. Rubber elements only.