Filter
Top Products
English
www.doro.com 31
The answering machine
Playback and Deletion of ICM messages (base unit)
The display on the base unit will show the total number of messages in the
memory.
1.
Press
9
to start playback of all ICM messages, alternatively press and hold
9
to hear just the new ICM messages. The number of recorded messages will
now be announced.
2.
After each ICM message the day and time the message was received will be
announced.
3.
If you wish to delete a single ICM message press
C
while the message is
playing.
4.
After all ICM’s have nished the machine will announce “End of messages.
To delete all messages, press delete”.
5.
To delete all messages, press
C
within 8 seconds (the display will count
down). Deletion of all messages simultaneously is only possible after
playback of all ICM’s.
6.
If you do not wish to delete messages press
■
within 8 seconds.
7.
Messages will automatically be saved, you must therefore remember to delete
old messages to avoid lling up the memory.
The following functions are available during playback:
Button
Function
88
Repeat/skip back to previous.
99
Skip to next (press once). Press and hold button down to play
back messages at a faster speed.
■
Stop playback.
C
Erase current message.
+
/
+/+
-
Increase or decrease the volume.
9
Message playback (ICM). Press again to pause during playback
(max. 60 seconds), the display will show
P
and a beep is heard
every 10 seconds. Press
9
again to continue playback.