Filter
Top Products
English
22
www.doro.com
22 www.doro.com22
Settings
Dialling method (UK only)
You can select either tone or pulse dialling, the standard setting is tone.
In normal domestic use, this setting should not require changing.
1.
Press
w
.
2.
Scroll
{
/
}
to SETUP. Press
0
0.0
3.
Scroll
{
/
}
to DIALMODE. Press
0
0.0
4
.
Scroll
{
/
}
to the required setting.
5.
Press
0
to save.
0 to save.0
Recall button timing
In some advanced PBX system the recall timing may require adjustment. In
normal domestic use, this setting should not require changing.
RECALL 1=100ms (normal) and RECALL 2=270ms (600 ms for AU & NZ).
1.
Press
w
.
2.
Scroll
{
/
}
to SETUP. Press
0
0.0
3.
Scroll
{
/
}
to RECALL. Press
0
0.0
4
.
Scroll
{
/
}
to the required setting.
5.
Press
0
to save.
0 to save.0
PBX function
This telephone has a PBX function that will automatically insert a pause
between the rst and second digits of the telephone number before dialling.
For Example:
When the function is activated (see below), dialling a phone number ie:
0123456, the phone will dial 0 followed by a pause, and then the remaining part
of the number 123456.
The telephone can handle two pre xes of up to 4 digits. PREFIX 1 is the
normal setting and PREFIX 2 is used if a second pre x and pause interval are
required.