Filter
Top Products
3
6
3.3.5 Five-Digit Entry Code Programming
This programming sequence programs five-digit entry codes into the system memory. The number of
five digit entry codes that can be programmed is limited to six. We suggest that all entry codes that
are programmed into the system be listed with the names of persons that they have been assigned to
(see appendix).
1. Press and enter the four-digit MASTER CODE (beep).
2. Enter the five-digit entry code then press (beep).
3. Repeat step 2 to enter additional entry codes.
4. Press TOGETHER to end this programming step (beeeeeep).
3.3.6 Delete Five-Digit Entry Codes
1. Press and enter the four-digit MASTER CODE (beep).
2. Enter the five-digit entry code then press (beep).
3. Repeat step 2 to delete more entry codes.
4. Press TOGETHER to end this programming step (beeeeeep).
3.3.7 Delete All Five-Digit Entry Codes
This programming sequence deletes all five-digit entry codes that have been programmed into
the system. CAUTION: this programming step is irreversible once it is started
.
1. Press and enter the four-digit MASTER CODE (beep).
2. Press then press (beep). This programming sequence will automatically
end itself. This will be indicated by a long tone (beeeeeep).
3.3.8 Five-Digit Entry Code Divide Number
The five-digit entry codes can be made to activate either relay 1 or relay 2 by programming a five-digit
divide number. Five-digit entry codes equal to or less than the divide number will activate relay 1.
Five-digit entry codes greater than the divide number will activate relay 2. HINT: you can make all
five-digit entry codes (except 00000) activate relay 2 by programming divide number 00000, or make
all five-digit entry codes activate relay 1 by programming divide number 99999.
1. Press and enter the four-digit MASTER CODE (beep).
2. Enter the five-digit divide number then press (beep).
3. Press TOGETHER to end this programming step (beeeeeep).