Filter
Top Products
3
1
3.1.9 Keypad Function
This programming sequence sets the function of the 0 through 9, and the # keys on the keypad
during conversation. The keys can be set to hang-up the entry system when they are pressed during
conversation, or they can be programmed to DTMF tone out during conversation. The later may be
desirable if the entry system is used with an auto-attendant type telephone system where the caller is
prompted to enter numbers from a touch-tone telephone. HINT: If DTMF tones are required, program
the # or * key to hang-up the system.
1. Press
and enter the four-digit MASTER CODE (beep).
2. Enter the desired key number then press (beep).
3. Press (beep) for hang-up, or press (beep) for touch-tone.
4. Repeat steps 3 and 4 to program other keys.
5. Press TOGETHER to end this programming step (beeeeeep).
3.1.10 Star (*) Key Function
This programming sequence sets the function of the key on the keypad during conversation. This
key can be set to hang-up the entry system when pressed during conversation, or it can be
programmed to touch-tone out during conversation.
1. Press and enter the four-digit MASTER CODE (beep).
2. Press (beep) for hang-up, or press (beep) for touch-tone.
3. Press TOGETHER to end this programming step (beeeeeep).