Filter
Top Products
68
PnP Port
PnP Server Port
PnP Transport
PnP Transfer protocol – UDP or TCP
PnP Interval
Interval time for querying PnP server. Default is 1 hour.
Phone Flash Settings
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Protocol Type
Specify the Protocol type FTP, TFTP or HTTP.
Config File Name
Specify configuration file name. The phone will use its MAC ID
as the config file name if this is blank.
Update Interval
Specify the update interval time. Default is 1 hour.
Update Mode
1. Disable – no update
2. Update after reboot – update only after reboot.
3. Update at time interval – update at periodic update interval
TR069 Settings
Enable TR069
Enable/Disable TR069 configuration
ACS Server Type
Select Common or CTC ACS Server Type.
ACS Server URL
ACS Server URL.
ACS User
User name for ACS.
ACS Password
ACS Password.
TR069 Auto Login
Enable/Disable TR069 Auto Login.
"Inform" Sending Period
Time between transmissions of “Inform” Unit is seconds.
8.3.6.2 Syslog
Syslog is a protocol used to record log messages using a client/server mechanism. The
Syslog server receives the messages from clients, and classifies them based on priority and
type. Then these messages will be written into a log by rules which the administrator has
configured. There are 8 levels of debug information.