27
7.2.3 Service Code
Sets the codes to be dialed to an IP PBX to enable or disable the following functions.
1. Mode – Selects whether or not all these codes are active.
2. DND
3. Always CFW – Always Call Forward
4. Busy CFW - Call Forward Busy
5. No Answer CFW - Call Forward No Answer
6. Anonymous
7.3 Network
Enter Network settings as discussed in Section 2.2.
7.4 Security
1. Menu Password – Password to enter configuration menu.
2. Keyboard Password – If this feature is enabled, this password must be entered whenever
the keypad is used.
3. Keyboard Status – Enable or disable key lock as described above.
7.5 Maintenance
See Section 8.3.6 for a detailed explanation of each option. It is recommended that these
features be accessed through the web interface.
1. Auto Provision – Select DHCP Option, Plug and Play, or Phone Flash for autoprovision.
2. TR069 – Enable or disable configuration via TR069.
3. Backup – Select Config, Phonebook or none for backup. File name must be entered.
4. Upgrade – Select Image, MMI Set, BMF, Ring, Config, or Phonebook for upgrade. File
name must be entered.
7.6 Factory Reset
Choose Yes to return the phone to factory default settings.
8 Web Configuration
8.1 Introduction of configuration
8.1.1 Configuration Methods
There are three methods which can be used to configure this phone:
Phone keypad – As discussed in previous sections
Web browser - Recommended way