Filter
Top Products
28
Telnet with CLI command
8.1.2 Password Configuration
There are two levels of access: root level and general level. A user with root level access
can browse and set all configuration parameters, while a user with general level can set all
configuration parameters except server parameters for SIP or IAX2.
Default user with general level:
Username: guest
Password: guest
Default user with root level:
Username: admin
Password: admin
The default password for the phone screen menu is 123.
8.2 Setting via web browser
Enter the phone’s IP address into the address bar of the web browser. This assumes that the pc
and the phone are on the same subnet. Note: Internet Explorer, Firefox, Chrome, or Safari
are supported browsers.
If the IP address is not known, it can be displayed on the phone’s LCD by pressing the
Menu->Status.
After entering the IP address, the following screen is displayed.
After configuring the IP phone, remember to click SAVE under the Maintenance tab. If this
is not done, the phone will lose the modifications when it is rebooted.