Filter
Top Products
64
Encryption Key
Save Autoprovision
Information
Save the Autoprovision username and password in the phone until
the server url changes
DHCP Option Settings
Field Name
Explanation
DHCP Option Setting
The phone supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom DHCP Option
Custom option number. Must be from 128 to 254.
Plug and Play Settings
Enable PnP
If this is enabled, the phone will send SIP SUBSCRIBE messages to
a multicast address when it boots up. Any SIP server understanding
that message will reply with a SIP NOTIFY message containing the
Auto Provisioning Server URL where the phones can request their
configuration.
PnP Server
PnP Server Address
PnP Port
PnP Server Port
PnP Transport
PnP Transfer protocol – UDP or TCP
PnP Interval
Interval time for querying PnP server. Default is 1 hour.
Phone Flash Settings
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Protocol Type
Specify the Protocol type FTP, TFTP or HTTP.
Config File Name
Specify configuration file name. The phone will use its MAC ID
as the config file name if this is blank.
Update Interval
Specify the update interval time. Default is 1 hour.
Update Mode
1. Disable – no update
2. Update after reboot – update only after reboot.