Filter
Top Products
10
1.6 LED Introduction
1.6.1 Programmable key LEDs for BLF
LED Status
Description
Steady green
The object is idle.
Slow blinking red
The object is ringing.
Steady red
The object is active.
Fast blinking red
The object has failed.
Off
Not subscribed.
1.6.2 Programmable key LEDs for Presence
LED Status
Description
Steady green
The object is online.
Slow blinking red
The object is ringing.
Steady red
The object is active.
Fast blinking red
The object has failed.
Off
Not subscribed.
1.6.3 Programmable key LEDs for MWI
LED Status
Description
Blinking Green
There are new voice mails.
Off
There is no new voice mail.
1.6.4 Power Indication LED (Power Light Enabled)
LED Status
Description
Steady red
Power on.
Blinking red
There is an incoming call.
Off
Power off.
1.6.5 Power Indication LED (Power Light Disabled)
LED Status
Description
Blinking red
There is an incoming call
2 Initial Connection and Setting
2.1 Connecting the phone
1. Connect to the network. Use the Ethernet cable in the package to connect the WAN port