Filter
Top Products
35
8.3.2.2 LAN Config
Field Name
Explanation
IP Address
LAN static IP.
Subnet Mask
LAN Subnet Mask.
DHCP Service
Activate DHCP server for LAN port. The phone must be rebooted
for the DHCP server setting to take effect.
NAT
Enable NAT operation
Port Mirror
Port Mirror can only be activated in bridge mode. If activated, the
data stream from the WAN port is copied to the LAN port of the
phone.
Enable Bridge Mode
If Bridge Mode is activated, the phone will not provide an IP address
for the LAN port. Instead, the LAN and WAN will be part of the
same network. If this is activated, clicking Apply, will cause the
phone will reboot.
Note: When LAN IP or bridge mode status is changed, the system will reboot! If bridge
mode is chosen, static LAN configuration will be disabled automatically.
8.3.2.3 Qos & VLAN Config
The phone supports 802.1Q/P protocol and DiffServ configuration. Use of a Virtual LAN
(VLAN) allows voice and data traffic to be separated.