Filter
Top Products
4. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
5. PRESS SPEAKER to end.
•
To use Tracker to transfer a call to a park orbit for retrieval
and transmit the call’s park orbit code and caller ID
information (if available),
1. ANSWER call AND SELECT
Transfer
.
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT
TRACK
.
4. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
5. PRESS SPEAKER button to end.
NOTE: Tracker parked calls will recall to your station after a prepro-
grammed time-out. You can either place the call into another Tracker page
orbit or retrieve the call.
•
To retrieve a call that you parked using the Tracker option,
1. PRESS HOLD button to scroll your held calls, (display shows
PAGE
and extension number of each parked call).
2. PRESS TAP to retrieve the displayed parked call.
•
If you receive a parked call message on your Tracker pager,
1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL Tracker pager orbit code (
#800 to #899 ).
4. RETRIEVE call.
•
To enable or disable a Tracker pager at your station,
1. PRESS INTERCOM.
2. DIAL
#07 to enable, OR DIAL #06 to disable.
3. PRESS SPEAKER to end.
Large Screen Display Speakerphone Station User’s Guide 73
GCA70-349 Other Advanced Features