Vertical Communications 8024S Telephone User Manual


 
DSUII Attendant User’s Guide
August, 03 Comdial 83
7.10 Automatic Set Relocation
If your installer has equipped your system with automatic set relo-
cation, when you move your telephone to a new location, the system
gives you a choice (through a display prompt) as to whether you want
to keep your previous programming or use the programming in the
new location.
• To maintain the extension number and programming
features from the old location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND PRESS HOLD while the
light is still flashing (your telephone immediately assumed the fea
-
tures from the previous location).
• To assume the extension number and programming
features from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND DIAL # while the light is
still flashing (your telephone immediately assumes the features from
the new location).
NOTE: If you do not select a button after installing the telephone,
the system automatically defaults to the programming from the
previous location.